About Dynamics of Improving the Foam Concrete Technological and Operational Properties upon Disperse Reinforcement with Polypropylene Fibers
https://doi.org/10.23947/2949-1835-2023-2-4-69-76
Abstract
Introduction. The efficiency of the foam concrete products manufacture and application in construction is briefly overviewed. The reasons constraining the nomenclature of the manufactured products are listed. The information about evolvement of the foam concrete disperse fiber-reinforcement technology is provided. The need for scientific research aimed at studying the dynamics of the foam concrete technological and operational properties upon disperse reinforcement with polypropylene fibers is formulated.
Materials and Methods. The composition and properties of the materials used for manufacturing the foam concrete mixtures are listed. The methods used for assessing the technological and mechanical properties of the materials under study are indicated.
Results. The results of the experimental assessment of the polypropylene fiber length and amount influence on the dynamics of the plastic strengthening growth of the equally dense foam and fiber-reinforced concrete mixtures are presented. The scope of the polypropylene fiber influence on the dynamics of the studied mixtures plastic strengthening is analysed. The scientific substantiation of the reasons accelerating the mass transfer processes during the disperse reinforcement of mixtures with fibers is given. The results of the bending tensile strength tests of the large-size D600 concrete specimens are presented.
Discussion and Conclusion. The efficient positive influence of the polypropylene fiber, in correlation with its length, on the following foam concrete properties has been distinguished:
- speed of phase transfer;
- ultimate extensibility;
- elasticity and strength modulus of D600 concrete.
About the Author
V. N. Morgun
Southern Federal University
Russian Federation
Russian Federation
Vladimir N. Morgun, Cand.Sci.(Engineering), Associate Professor of the Engineering and Construction Disciplines Department
105/42, B. Sadovaya str., Rostov-on-Don, 344006
References
1. Kazin AS. Industrial Housing Construction: Yesterday, Today, Tomorrow. Housing Construction. 2018;(10):22–26. URL: https://cyberleninka.ru/article/n/industrialnoe-domostroenie-vchera-segodnya-zavtra (accessed: 07.09.2023). (In Russ.).
2. Farrakhov AG. Resource-Saving in the Construction and Housing-and-Utilities Sector. National Interests: Priorities and Security. 2015;11(11):53–60. URL: https://www.fin-izdat.ru/journal/national/detail.php?ID=65126 (accessed: 07.09.2023). (In Russ.).
3. Pestsov VI, Otsokov KA, Vylegzhanin VP, Pinsker VA. The Efficiency of the Cellular Concrete Use in the Construction of Russia. Stroitel'nye materialy (Construction Materials). 2004;(3):7–8. URL: http://rifsm.ru/u/f/sm_03_04.pdf (accessed: 07.09.2023). (In Russ.).
4. Pinsker VA, Vylegzhanin VP. Cellular Concrete as a Time-Tested Material for Capital Construction. Stroitel'nye materialy (Construction Materials). 2004;(3):44–45. URL: http://rifsm.ru/u/f/sm_03_04.pdf (accessed: 04.09.2023). (In Russ.).
5. Morgun VN, Morgun LV, Smirnova PV, Nabokova YaS, Kostylenko KI, Bogatina AYu. Civil engineering Science for the Implementation of Federal Law No. 261. Tekhnicheskoe regulirovanie . 2011;(10):21–24. (In Russ.).
6. Pukharenko YuV, Golubev VYu. About the Viscosity of the Fiber Concrete Destruction. Bulletin of Civil Engineers. 2008;(3):80–83. (In Russ.).
7. Lobanov IA. Features of the Structure and Properties of Dispersed Reinforced Concrete. In: Collection of Works "Manufacturing Technology and Properties of New Composite Building Materials". Leningrad: LISI; 1982. P. 5–10. (In Russ.).
8. Lobanov IA, Pukharenko YuV. Raw Mix for the Manufacture of Cellular Concrete. USSR Patent, Certificate No 863545.1981. 3 p. URL: https://patentdb.ru/image/1872622 (accessed: 02.09.2023). (In Russ.).
9. Perepelkin KE. Modern Chemical Fibers and Prospects for Their Use in the Textile Industry. Rossiiskii Khimicheskii Zhurnal (Russian Chemistry Journal) (Journal of the Russian Chemical Society named after D.I.Mendeleev). 2002;46(1):31–48. URL: https://www.chem.msu.su/rus/jvho/2002-1/31.pdf (accessed: 04.09.2023). (In Russ.).
10. Sazankova ES. Justification of the Parameters of Belt Conveyors for Transporting Rock Mass along a Spatial Curved Route, Taking into Account the Starting Modes. Cand.Sci (Engineering) Dissertation. Moscow; 2012. 149 p. (In Russ.).
11. Pukharenko YuV, Staroverov VD, Gerasimenko AA. Improving the Safety and Quality of Building Materials Based on the Assessment of Experience and Business Reputation of the Enterprise. Stroitel'nye materialy (Construction Materials). 2019;(5):3–8. https://doi.org/10.31659/0585-430X-2019-770-5-3-8 (In Russ.).
12. Morgun VN, Morgun LV, Bogatina AYu. Experimental Assessment of Nano-Effects in Foam Concrete Technology. Stroitel'nye materialy (Construction Materials). 2020;(7):45–48. https://doi.org/10.31659/0585-430X-2020-7827-45-48 (In Russ.).
13. Morgun VN. Method of Determination of Plastic Strength of Foam Concrete Mixtures. RF Patent No 2316750. 2008. 6 p. (In Russ.).
14. Shakhova LD. Foam Concrete Technology. Theory and Practice. Monograph. Moscow: Association of Civil Engineering Universities; 2010. 248 p. (In Russ.).
15. Morgun LV, Votrin DA, Morgun VN. Influence of the Disperse Reinforcement Diameter on the Speed of Phase Transfer in Fibro-Foam Concrete Mixes. Stroitel'nye materialy (Construction Materials). 2018;(11):27–30. https://doi.org/10.31659/0585-430X-2018-765-11-27-30 (In Russ.).
16. Perepelkin K.E. Russian Aromatic Fibres. Hearle J.W.S. (ed.) In book: High-Performance Fibres. Cambridge: Woodhead Publishing Limited; 2001. 334 p. URL: http://library.navoiy-uni.uz/files/hearle%20j.w.s.%20(ed.)%20%20high%20performance%20fibres%20(1st%20edition)(2001)(329s).pdf (accessed: 07.09.2023).
17. Pertsev VT. Management of the Early Concrete Structuring Processes. Monograph. Voronezh: Voronezh State University of Architecture and Civil Engineering; 2006. 234 p. (In Russ.).
Review
For citations:
Morgun V.N. About Dynamics of Improving the Foam Concrete Technological and Operational Properties upon Disperse Reinforcement with Polypropylene Fibers. Modern Trends in Construction, Urban and Territorial Planning. 2023;2(4):69-76. (In Russ.) https://doi.org/10.23947/2949-1835-2023-2-4-69-76
Views:
278
Email this article 